HP LaserJet Managed MFP E52545dn - Certificate of Volatility

Hewlett-Packard Certificate of Volatility
Model:
H
P LaserJet Managed MFP
E52545dn
Part Number:
E52545dn = 3GY19A
Address:
Hewlett Packard Company
11311 Chinden Blvd
Boise, ID 83714
Volatile Memory
Does the device contain volatile memory (Memory whose contents are lost when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (SRAM, DRAM, etc):
DRAM
Size:
1792MB
User Modifiable:
Yes No
Function:
Used for temporary storage
during the processing of
jobs and for applications
running on the OS.
Steps to clear memory:
When the printer is powered
OFF, the memory is erased.
Non-Volatile Memory
Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (Flash, EEPROM, etc):
IOD EEPROM
Size:
32 KB
User Modifiable:
Yes No
Function:
Store customer setting data
for backup/restore
Steps to clear memory:
There are no steps to clear
this data.
Type (Flash, EEPROM, etc):
SPI
Size:
4MB
User Modifiable:
Yes No
Function:
BIOS
Steps to clear memory:
There are no steps to clear
this data.
Mass Storage
Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)?
Yes No If Yes please describe the type, size, function, and steps to clear the memory below
Type (HDD, Tape, etc):
eMMC
Size:
16GB
User Modifiable:
Yes No
Function:
Stores customer data,
OS, applications,
digitally signed firmware
images, persistent data,
and temporary data used
for processing and
system functions
Steps to clear memory:
1. Power cycle the printer to
erase the customer data partition
cryptographically.
2. Instigate a non-secure fast erase
from the EWS.
USB
Does the item accept USB input and if so, for what purpose (i.e. Print Jobs, device firmware updates, scan upload)?
Yes No If Yes please describe below
Print jobs, HP digitally signed firmware upgrades, 3rd party application loading. USB ports can be disabled.
Can any data other than scan upload be sent to the USB device)?
Yes No If Yes please describe below
RF/RFID
Does the item use RF or RFID for receive or transmit of any data including remote diagnostics. (e.g. Cellular phone,
Bluetooth) Yes No If Yes please describe below
Purpose:
Frequency:
Bandwidth
Modulation:
Effective Radiate Power (ERP):
Specifications: