Software Suite for Oracle Instruction Manual

4.3
Setting up RSH/CLI Connections for Recovery Manager
Recovery Manager for Oracle User’s Guide
4.2 Setting up RSH/CLI Connections for Recovery Manager
This section describes how to set up RSH/CLI for a root user on the primary host, backup host,
Veritas NetBackup master server, and the InServ Storage Server.
Figure 4-1 represents the RSH/CLI connections relationship between the primary host, the
backup host, Veritas NetBackup master server, and the InServ Storage Server.
Figure 4-2 represents the RSH/CLI connection relationship with 3PAR Remote Copy support.
Figure 4-1. RSH/CLI Connection Relationship
NOTE: RSH connections are available for Solaris systems only.
NOTE: If you are setting up an RSH connection, you must install the 3PAR InForm
Command Line Interface (CLI) in the
/opt/3par/cli directory prior to installing
3PAR Recovery Manager. Refer to the InForm OS CLI Administrator’s Manual for
instructions on installing the InForm CLI.
Root User
Root User
Backup
InServ Storage
Server
RSH
Veritas
Primary
NetBackup
Master
Server
CLI
Connection
CLI
Connection
RSH
Recovery Manager
User
Root User
Host
Host