Software Suite for Oracle Instruction Manual

4.5
Setting up RSH/CLI Connections for Recovery Manager
Recovery Manager for Oracle User’s Guide
2 Issue the rsh command for the primary host as follows:
3 Make sure the command completes successfully.
4.2.3 Setting Up RSH Connections from the Backup Host to the NetBackup
Master Server
If the Veritas NetBackup master server and the Recovery Manager backup host are not the
same, you must set up the RSH connection to the NetBackup master server as described in the
following steps. Otherwise, skip this section.
To set up an RSH connection from the backup host to the Veritas NetBackup master server:
1 Log in to the NetBackup master server as the
root or Oracle user.
2 Modify or create the
~/.rhosts file to contain the following line:
where:
◆ <backup_host> is the host name of the backup host.
◆ <root_user> is the root user’s name on the backup host.
4.2.4 Verifying RSH Connections from the Backup Host to the NetBackup
Master Server
From the backup host, verify the RSH connection to the NetBackup master server as follows:
1 On the backup host, login in as the root or Oracle user (as you logged in during set up).
2 Issue the
rsh command for the NetBackup master server as follows:
Make sure the command completes successfully.
<backup_host># rsh <primary_host> ls /
<backup_host> <root_user>
<backup_host># rsh <nbu_master> ls /