Software Suite for Oracle Instruction Manual

4.17

Setting Up SSH Connections for Recovery Manager

Recovery Manager for Oracle User’s Guide

In the example above:

◆ <adm_user> is the user name of the InServ Storage Server’s administrator.

◆ <ss_name> is the system name of the InServ Storage Server attached to the primary

host.

◆ <adm_password> is the administrator's password.

◆ <password> is the password (for the InForm Storage Server) for the CLI user being

created.

◆ <username> is the user being created.

4 Copy the public key of the primary host to the InServ Storage Server.

In the example above:

◆ <username> is the user being created.

◆ <ss_name> is the system name of the InServ Storage Server attached to the primary

host.

◆ <password> is the password for the CLI user being created.

◆ <public_key> is the SSH public key of the primary host.

4.3.12 Verifying Connections from the Primary Host to the InServ Storage

Server

From the primary host, verify the connection from the primary host to the InServ Storage

Server as follows:

<primary_host># ssh <username>@<ss_name>

<username>'s password: <password>

cli% setsshkey

Please enter the SSH puplic key below. When finished, press enter twice. The

key is usually long. It's better to copy it from inside and editor and paste

it here. (Please make sure there are no extra blanks.)

<public_key>

SSH public key successfully set!