User's Manual

4.2
Overview
3PAR Host Explorer User’s Guide
4.1 Overview
The chapter provides instructions for using the 3PAR Host Explorer.
4.2 Verifying the 3PAR Host Explorer Package is Installed
To verify that the 3PAR Host Explorer package has been installed correctly, see the appropriate
section below:
■ To find out if the product is installed on a Solaris system, see Verifying the Installation on
Solaris Sparc Systems on page 3.4.
■ To find out if the product is installed on a Linux system, see Verifying the Installation on
Red Hat Linux Systems on page 3.4.
■ To find out if the product is installed on a Windows system, see: Verifying the Installation
on Microsoft Windows Server on page 3.3.
4.3 Verifying the 3PAR Host Explorer Process is Running
X To verify that the 3PAR Host Explorer process is running, issue the TpdHostAgent status
command.
Example output:
4.4 Stopping the 3PAR Host Explorer Process
By default, the Host Explorer process starts at every reboot of the host.
X If you do not want the process running on the host, issue the TpdHostAgent stop
command.
Printing the status of 3PAR Host Explorer daemon:
3PAR Host Explorer is running..
The current time interval values are:
Value is PushInterval=86400
Å default
Value is RefreshInterval=60 Å default