Software Manual

A.4

Setting Up Remote Copy

Remote Copy User’s Guide InForm OS Version 2.3.1

■ For 1-to-N Remote Copy configurations, follow steps 1 through 10 in Table A-3 to set up

the first pair in the configuration. Repeat the entire process for each additional pair up to a

maximum of two pairs.

For detailed instructions on setting up Remote Copy, refer to Chapter 3, Remote Copy

Setup or Chapter 4, Remote Copy in Domains.

NOTE: For 1-to-N Remote Copy, all Remote Copy pairs must share the same

primary storage server.

Table A-3. Remote Copy Setup

Step Reference Primary System Backup System

1 Setting Up the

Primary Server on

page 3.18

startrcopy --

2 “ For RCIP:

creatercopytarget

<target_name> IP

For RCFC:

creatercopytarget

<target_name> FC

<node_WWN>

<N:S:P:WWN>

3 Setting Up the

Backup Server on

page 3.19

-- startrcopy