Software Manual

B.3
admitrcopylink
InForm OS Version 2.3.1 Remote Copy User’s Guide
COMMAND
admitrcopylink
DESCRIPTION
The admitrcopylink command adds one or more links (connections) to a Remote Copy
target system.
SYNTAX
■ For Remote Copy over IP (RCIP), the syntax for the admitrcopylink command is as
follows:
admitrcopylink <target_name> <N:S:P:IP_address>...
■ For Remote Copy over fibre channel (RCFC), the syntax for the admitrcopylink command
is as follows:
admitrcopylink <target_name> <N:S:P:WWN>...
AUTHORITY
Service
OPTIONS
None.
SPECIFIERS
<target_name>
The target name, as specified with the creatercopytarget command (see
creatercopytarget on page B.20).
<N:S:P:IP_address>...
Specifies the node, slot, and port of the Ethernet port on the primary system and an IP
address on the target system.
<N:S:P:WWN>...
Specifies the node, slot, and port of the Fibre Channel adaptor port on the primary system
and a world wide name (WWN) address on the target system.
NOTE: You need access to all domains in order to run this command.