Software Manual

B.4
admitrcopylink
Remote Copy User’s Guide InForm OS Version 2.3.1
RESTRICTIONS
Functionality of this command requires the 3PAR Remote Copy license. Contact your local
service provider for more information.
EXAMPLES
The following example adds a link on System2 (<target_name>), using the node, slot, and
port information of node 1, slot 1, port 1 of the Ethernet port on the primary system. The IP
address
193.1.2.11 specifies the address on the target system:
The following WWN creates an RCFC link to target
System2, which connects to the local
5:3:2
(N:S:P) in the target system:
NOTES
■ The mode (RCIP or RCFC) is set using the creatercopytarget command. See
creatercopytarget on page B.20.
■ This command concludes by returning a list of one or more links to be admitted.
■ For IP targets this list is made up of pairs composed of the node of the ethernet port on the
local system and an IP address of the peer port on the target system.
■ For FC targets this list is made up of sets with the node, slot, and port of the FC port on the
local system and WWN of the peer port on the target system.
■ The specifier <node:IP_address> has been deprecated.
cli% admitrcopylink System2 1:1:1:193.1.2.11
cli% admitrcopylink System2 FC 5:3:2:20010002AC000060