Software Manual

B.8
admitrcopyvv
Remote Copy User’s Guide InForm OS Version 2.3.1
RESTRICTIONS
Functionality of this command requires the 3PAR Remote Copy license. Contact your local
service provider for further information.
EXAMPLES
In the following example, the admitrcopyvv command adds the volume vv1 to the primary
volume group Group1. At the same time, it adds the volume on the target system
InServ1_in to the corresponding secondary volume group Group1.r<sys_ID> that was
previously created by issuing the
creatercopygroup command:
NOTES
■ A secondary volume mapping must be provided for each target in the group.
■ If a group’s target has the mirror_config policy set and the group is a primary group,
then this command is mirrored to that target and the volume is added to the secondary
volume group. If the policy is set and the group is a secondary, this command fails.
■ For multiple target Remote Copy groups, in addition to adding the primary/secondary
mapping on the target systems, the relevant mapping between the target systems will be
added to the backup groups.
cli% admitrcopyvv vv1 Group1 InServ1_in:Group1.r<sys_ID>