Software Manual

B.10

controlport

Remote Copy User’s Guide InForm OS Version 2.3.1

■ controlport rcip ping [-c <count>|-w <wait>|-s <size>|-pf]

<IP_address> <node:slot:port>...

■ controlport rcfc init [-f] <node:slot:port>

■ controlport rcfc delete [-f] <node:slot:port>

AUTHORITY

Super, Service

SUBCOMMANDS

config

Sets the specified connection mode and type on FC ports. Also allows setting the unique

node WWN option for the port. When unique_nwwn is enabled, the port presents a unique

node name on the connection and this is needed by certain initiators such as ONTAP.

rst

Resets a port.

offline

Holds the specified port offline indefinitely. Issue controlport rst to bring the port

back online.

lip

Specifies that a Loop Initialization Primitive (LIP) command is issued from the port if there is

a private loop topology. If the -c option is specified, then the LIP command is issued

through the specified drive cage. If there is a point-to-point topology, then the link is reset.

If there is a public loop or fabric topology, then a Registered State Change Notification is

issued to the fabric controller.

Sets the connection type. The specified port will be reset.Note that this option is

deprecated and will be removed in a subsequent release.

NOTE: You need access to all domains in order to run this command.