Software Manual

B.19
creatercopygroup
InForm OS Version 2.3.1 Remote Copy User’s Guide
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
further information.
EXAMPLES
The following example creates an asynchronous periodic mode volume group named Group1
whose target system is InServ2 (target name InServ2_out):
If using domains, the syntax would appear as:
NOTES
■ If the mirror_config policy is set for this group's target and the group is a primary
group, then the
creatercopygroup command will be mirrored to the target and a
corresponding secondary volume group will also be created. The secondary group uses the
same group name with
.r<Sys ID> added as a suffix, for example .r129 for InServ
1000129. If the
mirror_config policy is set and the group is a secondary group, then this
command will fail.
■ The maximum length of the group is 22 characters if the mirror_config option policy is
set for the specified target. If it is not set, the maximum length is 31 characters.
■ For multiple target Remote Copy groups, when creating a group with multiple targets, the
groups created on those targets will also be created with a backup target between the
secondary groups.
cli% creatercopygroup Group1 InServ2_out:periodic
cli% creatercopygroup -domain domain2 Group1 InServ2_out:periodic