Software Manual
B.31
removercopygroup
InForm OS Version 2.3.1 Remote Copy User’s Guide
COMMAND
removercopygroup
DESCRIPTION
The removercopygroup command removes a Remote Copy volume group.
SYNTAX
removercopygroup <group_name>
AUTHORITY
Edit
OPTIONS
None.
SPECIFIERS
<group_name>
The name of the group to be removed.
RESTRICTIONS
■ This command requires the 3PAR Remote Copy license. Contact local service provider for
further information.
■ This is not allowed if Remote Copy is in progress; the system will generate an error. The
group must be stopped using the
stoprcopygroup command.
■ You need access to the domain of the specified group (<group_name>) in order to run this
command.
EXAMPLES
The following example removes Group1 from a Remote Copy system:
CAUTION: Ensure that the correct group to be removed has been selected before
executing this command.
cli% removercopygroup Group1