Software Manual

B.67
startrcopygroup
InForm OS Version 2.3.1 Remote Copy User’s Guide
COMMAND
startrcopygroup
DESCRIPTION
The startrcopygroup command turns on Remote Copy for the specified Remote Copy
volume group.
SYNTAX
startrcopygroup [options <arg>] <group_name>
AUTHORITY
Super, Edit
OPTIONS
-wait
Specifies that the command blocks until the initial synchronization is complete. The system
generates an event when the synchronization is complete.
-nosync
Prevents the initial synchronization and sets the volumes to a synchronized state.
-t <target_name>
Indicates that only the group on the specified target is started. If this option is not used, by
default, the startrcopygroup command will affect all of a group’s targets.
SPECIFIERS
<group_name>
The name of the Remote Copy volume group. Can be obtained using the showrcopy
command.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
further information.
EXAMPLES
The following example starts Remote Copy for Group1:
cli% startrcopygroup Group1