Software Manual

B.82
syncrcopy
Remote Copy User’s Guide InForm OS Version 2.3.1
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
further information.
EXAMPLES
The following example specifies that Remote Copy volume group Group1 should be
synchronized with it’s corresponding secondary volume group:
NOTES
■ Mode (synchronous or asynchronous periodic) is set using the creatercopygroup
command. For information about modes and creating Remote Copy volume groups, refer
to creatercopygroup on page B.18.
■ For information about setting targets, refer to creatercopytarget on page B.20.
cli% syncrcopy Group1
Synchronization request issued for group Group1