User Manual

Compares selected disk magazine position. This value is only available for the pd_space_time
report.
example:
The following example specifies that all logical disks are compared:
&compare=LD
comparesel
When the compare option (see “compare” (page 129)) is used, up to 16 objects can be compared.
However, if there are more than 16 objects selected, then the comparesel option is used to select
a metric. The 16 objects with the highest peak values of the metric are chosen to be compared.
values:
Specify one of the following to choose the peak metric:
total_iops
(Default) The total (read + write) IOPs for the object.
total_kbps
The total (read + write) bandwidth (KBytes/s) for the object.
total_svctms
The total (read + write) service time in millisec for the object.
total_qlen
The total queue length for the object.
busy_pct
The percentage of time that the object is busy (i.e., has at least one outstanding operation).
cpu_busy
The percentage of CPU busy time.
interrupts
The CPU interrupts per second.
ctxtsws
The CPU context switches per second.
total_space
The total selected space.
raw_space
The raw space (including RAID overhead).
used_space
The used space.
free_space
The free space.
TotalRsvdSize
The total reserved size.
TotalRawSize
The total raw (including RAID overhead) size.
VirtSize
Report Options 131