User Manual

See “ldspaceunit” (page 142).
GiB (2^30 bytes)
See “ldspaceunit” (page 142).
examples:
The following example specifies that the physical disk space unit should be in chunklets:
&pdspaceunit=Chunklets
The following example specifies that the logical disk space unit should be in gigabytes:
&pdspaceunit=GB%20%2810%5E9%20bytes%29
The following example specifies that the logical disk space unit should be in gibibytes:
&pdspaceunit=GiB%20%282%5E30%20bytes%29
vvspaceunit
Use the vvspaceunit option to determine the unit of measure for virtual volume space reports.
This option can only be specified once in a given query string.
values:
Specify one of the following:
MiB (2^20 bytes)
See “ldspaceunit” (page 142).
GB (10^9 bytes)
See “ldspaceunit” (page 142).
GiB (2^30 bytes)
(Default). See “ldspaceunit” (page 142).
examples:
The following example specifies that the virtual volume space unit should be in megabytes:
&vvspaceunit=MiB%20%282%5E20%20bytes%29
The following example specifies that the virtual volume space unit should be in gigabytes:
&vvspaceunit=GB%20%2810%5E9%20bytes%29
The following example specifies that the virtual volume space unit should be in gibibytes:
&vvspaceunit=GiB%20%282%5E30%20bytes%29
selcageid
Use the selcageid option to select a drive cage. When no value is specified, no cages are
excluded based on their cage IDs.
Report Options 143