Instruction Manual

3PAR InForm Management Console 4.1.0 User’s Guide
388 320-200231 Rev A
b. If you do not want to promote the snapshots to base volumes, select Do not
promote snapshots to base volumes.
c. If you do not want to continue taking snapshots during failover, select Do not take
snapshots.
8. Click OK.
9. Click Yes when prompted for confirmation.
In the right pane of the Remote Copy Groups screen:
Primary-Rev is displayed under the Backup Role column indicating that the groups on
the backup server are currently acting as the primary groups. Any data is written to the
groups on the backup server.
The DR state column displays Failover.
See also:
Viewing Remote Copy Groups
Selecting Multiple Items
Recover Remote Copy Groups
Switch Failover Remote Copy Groups
Note: The switch failover operation is only allowed for Synchronous Long
Distance Remote Copy setups.
For Synchronous Long Distance Remote Copy, the InForm Management Console allows you
to switch failover of Remote Copy groups from one backup server to the other backup
server. For example, in a Synchronous Long Distance Remote Copy setup where source
server A is backed up to backup servers B and C, if Remote Copy groups are failed over
from source server A to backup server B, you can switch failover from backup server B to
backup server C.
Note: The following procedure assumes that failover has already been
performed on one backup system.
To switch failover Remote Copy groups:
1. Navigate
to the Remote Copy Groups screen.
2. In the left pane, right-click the graphic of the system on which you wish to switch
failover and select Switch Failover Groups from <original failover system>.
The Remote Copy Switch Failover dialog box appears.