Operating System Software Owner manual

d. Verify that the Role of the primary volume group is Primary.
For example, the showrcopy output on System1 shows that group sync_group_1 is
correctly restored to Primary:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System2 9 IP ready mirror_config
Link Information
Target Node Address Status Options
System2 0 10.100.33.11 Up
System2 1 10.101.33.11 Up
receive 0 10.100.33.11 Up
receive 1 10.101.33.11 Up
Group Information
Name Target Status Role Mode Options
sync_group_1 System2 Started Primary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 413 remotevv.0 375 Synced Thu Dec 14 18:01:13 PST 2006
localvv.1 414 remotevv.1 376 Synced Thu Dec 14 18:01:13 PST 2006
Name Target Status Role Mode Options
sync_group_2.r11 System2 Stopped Secondary Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 423 localvv.0 385 Stopped Thu Dec 14 17:51:49 PST 2006
remotevv.1 424 localvv.1 386 Stopped Thu Dec 14 17:51:44 PST 2006
112 Disaster Recovery for 1-to-1 Configurations