Operating System Software Owner manual

Part I Setting the Foundation for Remote Copy
“Planning Your Remote Copy Setup Strategy” (page 13)1. Plan your setup strategy.
“Deciding on a Remote Copy Configuration” (page 14)2. Decide on the Remote Copy configuration to use.
“Choosing Network Connections” (page 21)3. Choose the type of network connection to use.
“Considering Requirements and Restrictions” (page 23)4. Check the requirements and restrictions to make sure the
system is prepared for the Remote Copy setup you are
planning.
“Gathering Setup Information” (page 29)5. Obtain and organize the information about your network
you’ll need for the setup.
“Setting the Transport Layer” (page 33)6. Configure the Remote Copy transport layer.
When you have set the foundation for your Remote Copy system, continue to “Setting Up the Remote Copy
Servers” (page 42).