Operating System Software Owner manual

First Backup System (System2)
When all systems are up, the showrcopy command output on one of the backup systems (for
example, System2) looks like the output for this example 1-to-N configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 11 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.96 Up
System1 1 10.101.33.96 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1.r96 System1 Started Secondary Periodic Last-Sync Thu Dec 14
18:19:17 PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 413 localvv.0 21 Syncing (10%) NA
remotevv.1 414 localvv.1 22 Syncing (15%) NA
Second Backup System (System3)
When all systems are up, the showrcopy command output on the other backup system (for
example, System3) looks like the output for this example 1-to-N configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 4 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.96 Up
System1 1 10.101.33.96 Up
receive 0 10.100.33.96 Up
receive 1 10.101.33.96 Up
Group Information
Name Target Status Role Mode Options
periodic_group_2.r96 System1 Started Secondary Periodic Last-Sync Thu Dec 14
18:19:12 PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
remotevv.0 385 localvv.2 23 Syncing (15%) NA
remotevv.1 386 localvv.3 24 Syncing (15%) NA
126 Disaster Recovery for 1-to-N Configurations