Operating System Software Owner manual

============================================================

TEST SUMMARY from 0:0:1 -> 10.100.18.164

Test Started: Wed Aug 10 10:34:15 PST 2011

Test Finished: Wed Aug 10 10:34:26 PST 2011

============================================================

Latency: 0.104 ms

Lost pings: 0 %

Through-put: 522 Mbits/second

Max MTU: 1500

Tx TCP Segs: 486675

Rx TCP Segs: 199271

TCP retrans: 0 %

Errored Segs: 0 %

Link 2:5:1 is SUITABLE for Remote Copy Use

SystemB# checkrclink stopserver

NOTES

• Do not check the links if CPU usage is already close to 100%. The link check temporarily

increases CPU usage.

• This test must be performed in two stages. To run a test between SystemA and SystemB:

Start the system on SystemB, specifying the <N:S:P> for SystemB and the <dest_addr>

for SystemA.

# checkrclink startserver <N:S:P> <dest_addr>

If you are running the checkrclink test on RCFC links, note the IP address displayed in the

output.

b. Start the client on the target system (SystemA), specifying the <N:S:P> for SystemA; the

<dest_addr> for SystemB (as an IP address for both RCIP and RCFC links); and the

duration of the test in seconds.

# checkrclink startclient <N:S:P> <dest_addr> <time>

c. (Optional) To end the test before it completes, on SystemA enter:

# checkrclink stopclient

d. After the test is complete, on SystemB enter:

# checkrclink stopserver

231