Operating System Software Owner manual

removercopytarget
NAME
removercopytarget -- The removercopytarget command removes target designation from
a Remote Copy system and removes all links affiliated with that target definition.
SYNTAX
removercopytarget [options] <target_name>
AUTHORITY
Super, Edit
Any role granted the rcopytarget_remove right.
NOTE: You need access to all domains in order to run this command.
OPTIONS
-cleargroups
Remove all groups that have no other targets or dismiss this target from groups with additional
targets. All groups that contain this target must be stopped before this can be issued.
-f
Do not ask for confirmation when -cleargroups is specified.
SPECIFIERS
<target_name>
The target name for the target definition to be removed.
RESTRICTIONS
• This command requires the HP 3PAR Remote Copy Software license. Contact your local service
provider for further information.
• A target definition cannot be deleted if it is being used by any group.
EXAMPLES
The following example removes targets System1 and System2 from the primary and backup
systems in a Remote Copy pair:
# removercopytarget System1
# removercopytarget System2
NOTES
None.
251