Operating System Software Owner manual

setvv
NAME
setvv -- The setvv command changes the properties associated with a virtual volume. Use the
setvv command to modify volume names, volume policies, allocation warning and limit levels,
and the volume’s controlling common provisioning group (CPG).
SYNTAX
setvv [options <arg>] <VV_name|pattern>...
AUTHORITY
Super, Edit
Any role granted the vv_set right can edit the properties of base volumes.
Any role granted the vvcopy_set right can edit the properties of physical copies of volumes.
Any role granted the sv_set right can edit the properties of virtual copies of volumes.
OPTIONS
At least one of the following options must be specified:
-clrrsv
Specifies that all reservation keys (i.e., registrations) and all persistent reservations on the virtual
volume are cleared.
-exp <time>{d|D|h|H}
Specifies the relative time from the current time that volume will expire. <time> is a positive
integer value and in the range of 0 to 43800 hours (1825 days). Time can be specified in
days or hours providing either the d or D for day and h or H for hours following the entered
time value.
-comment <comment>
Specifies any additional information up to 511 characters for the volume. Use -comment ""
to remove the comments.
-retain <time>{d|D|h|H}
Specifies the amount of time, relative to the current time, that the volume will be retained.
<time> is a positive integer value and in the range of 1 to 43800 hours (1825 days). Time
can be specified in days or hours providing either d or D for day and h or H for hours following
the entered time value.
NOTE: The -retain option requires the HP 3PAR Virtual Lock license. Contact your local
service provider for more information.
NOTE: If the volume is not in any domain, then its retention time cannot exceed the value of
the system's maximum VV retention time. The default value for the system's maximum VV
retention time is 14 days. If the volume belongs to a domain, then its retention time cannot
exceed the value of the domain's maximum VV retention time, if set. The retention time cannot
be removed or reduced once it is set. If the volume has its retention time set, it cannot be
removed within its retention time. If both expiration time and retention time are specified, then
the retention time cannot be longer than the expiration time.
–name <new_name>
Specifies that the name of the virtual volume be changed to a new name (as indicated by the
<new_name> argument) that uses up to 31 characters.
-snp_cpg <snp_cpg>
Specifies that the volume snapshot space is to be provisioned from the specified CPG. This
option moves all the logical disks currently contained in the snapshot space for these volumes
into the CPG. This is permitted only when none of the logical disks are shared with other
volumes that are not specified in this option. If the <snp_CPG> specifier is specified as "",
the volume snapshot space is longer provisioned from a CPG and the existing snapshot space
259