Operating System Software Owner manual

7 Setting Up 1-to-1 Remote Copy
To set up 1-to-1 Remote Copy in a unidirectional configuration:
“Considering Requirements and Restrictions” (page 23)1. Verify that your setup plan meets the Remote Copy
requirements.
Figure 17 (page 44) (basic 1-to-1 setup)2. Acquaint yourself with the basic 1-to-1 setup and with
the example Remote Copy pair used to illustrate
unidirectional setup.
“Example Unidirectional Setup” (page 67)
“Setting Up a Unidirectional Configuration” (page 67)3. Set up 1-to-1 Remote Copy in a unidirectional
configuration and start initial data replication for the
primary volume groups.
To set up 1-to-1 Remote Copy in a bidirectional configuration:
“Considering Requirements and Restrictions” (page 23)1. Verify that your setup plan meets the Remote Copy
requirements.
Figure 17 (page 44) (basic 1-to-1 setup)2. Acquaint yourself with the basic 1-to-1 setup and with
the example Remote Copy pair used to illustrate
unidirectional setup.
“Example Unidirectional Setup” (page 67)
“Setting Up a Unidirectional Configuration” (page 67)3. Set up unidirectional 1-to-1 Remote Copy and start initial
data replication for the primary volume groups.
“Example Bidirectional Setup” (page 76)4. Acquaint yourself with the example Remote Copy pair
used to illustrate bidirectional setup.
“Setting Up a Bidirectional Configuration” (page 76)5. Set up the bidirectional aspects of 1-to-1 Remote Copy
and start initial data replication for the primary volume
groups.
Figure 17 (page 44) illustrates an example unidirectional 1-to-1 setup.
43