Operating System Software Owner manual

Figure 17 Example Unidirectional 1-to-1 Remote Copy Configuration
Example backup systemExample primary system
System2System1System name
125112System ID
four (only two shown)eight (only two shown)Nodes
2 and 36 and 7Nodes dedicated to Remote Copy
Node 2: IP address 172.16.1.12Node 6: IP address 172.16.1.11Links
Node 3: IP address 172.16.2.12Node 7: IP address 172.16.2.11
System1System2Target system
Node 2: 172.16.1.11Node 6: 172.16.1.12Target Interface IP
Node 3: 172.16.2.11Node 7: 172.16.2.12
One secondary virtual volume
(vv1_remote)
One virtual volume (vv1)
One primary volume group (Group1)
Virtual volumes and volume groups
One secondary volume group
(Group1.r112)
44 Setting Up 1-to-1 Remote Copy