Operating System Software User Manual

First Primary System (System2)
When all systems are up, the showrcopy command output on one of the primary systems (System2)
looks like the following output for N-to-1 configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 11 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.63 Up
System1 1 10.101.33.63 Up
receive 0 10.100.33.63 Up
receive 1 10.101.33.63 Up
Group Information
Name Target Status Role Mode Options
periodic_group_1 System1 Started Primary Periodic Last-Sync Thu Dec 14 18:19:17
PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 413 remotevv.0 21 Syncing (10%) NA
localvv.1 414 remotevv.1 22 Syncing (15%) NA
Second Primary System (System3)
When all systems are up, the showrcopy command output on another primary system (System3)
looks like the following output for N-to-1 configuration:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
System1 4 IP ready mirror_config
Link Information
Target Node Address Status Options
System1 0 10.100.33.63 Up
System1 1 10.101.33.63 Up
receive 0 10.100.33.63 Up
receive 1 10.101.33.63 Up
Group Information
Name Target Status Role Mode Options
periodic_group_2 System1 Started Primary Periodic Last-Sync Thu Dec 14 18:19:12
PST 2006 , over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
localvv.0 385 remotevv.2 23 Syncing (15%) NA
localvv.1 386 remotevv.3 24 Syncing (15%) NA
Disaster Recovery for N-to-1 Configurations 183