Operating System Software User Manual

Part I Using SmartStart to Configure Storage
“Preparing to Configure” (page 8)1. Gather the information you will need to use SmartStart to
configure your HP 3PAR StoreServ 7000 Storage system.
“Understanding Storage” (page 39)2. Learn more about how HP 3PAR storage systems work.
NOTE: If you are not familiar with HP 3PAR storage systems,
HP highly recommends that you read this short introduction.
“Initializing the Service Processor” (page 12)3. Initializing the Service Processor.
“Setting Up the Storage System” (page 16)4. Setting up the HP 3PAR StoreServ 7000 Storage system.
“Connecting to the Storage System” (page 21)5. Connect to your new storage system.
“Configuring Hosts” (page 22)6. Configure Fibre Channel host connections or iSCSI host
connections.
“Configuring Storage” (page 30)7. Create storage and add the ability to use virtual volumes on
Microsoft Windows Server 2008 R2 and Windows Server
2012 server host systems.
“Installing HP 3PAR Management Console” (page 38)8. Install the HP 3PAR Management Console in order to manage
storage and access additional features and functionality.