Administrator's Guide

Removing and replacing hardware components
For information on removing and replacing a hardware component, follow the component removal
and replacement instructions in the appropriate storage system user guide. The following list
identifies the ProLiant model for each HP 3PAR StoreServ File Controller product:
• 3830 Gateway Storage: ProLiant DL380p Gen8
The ProLiant documentation is available at:
http://www.hp.com/go/proliantgen8/docs
NOTE: After replacing the server blade, you must ensure that the correct product name is installed
on the replacement part. The correct product name is important for applications such as System
Insight Manager and Insight Remote Support. To install the correct product name, browse to the
C:\hpnas\components\support\naming folder. Locate and run the Smart Component that
applies to your system. After running the Smart Component, you must shut down and then restart
your system for the changes to take effect. On multi-node clusters such as HP 3PAR StoreServ File
Controller systems, HP recommends that you move cluster resources to another node before shutting
down the node that is being renamed. If you run the incorrect Smart Component, the product name
will be set incorrectly, but it will not affect your system in any other way.
82 Troubleshooting, servicing, and maintenance