Command Reference Guide
Disk Enclosure Management Commands
Drive Cage Management
For Details SeeAuthorityDescriptionCommand
“locatecage” (page 206)Super, Service
1
Any role granted the
cage_locate right.
Locates a particular drive
cage.
locatecage
“setcage” (page 280)Super, Service
1
Any role granted the
cage_set right.
Sets parameters for a drive
cage.
setcage
“showcage” (page 361)Any role in the system.Displays drive cage
information.
showcage
1
You need access to all domains in order to run this command.
Physical Disk Management
For Details SeeAuthorityDescriptionCommand
“admitpd” (page 46)Super, Service
1
Admits one or all physical
disks to enable their use.
admitpd
Any role granted the
pd_admit right.
“checkpd” (page 63)Super, Service
1
Executes surface scans on
physical disks.
checkpd
Any role granted the
pd_check right.
“controlpd” (page 85)Super, Service
1
Any role granted the
pd_control right.
Spins physical disks up or
down.
controlpd
“dismisspd” (page 164)Super, Service
1
Any role granted the
pd_dismiss right.
Dismisses one or more
physical disks from use.
dismisspd
“setpd” (page 311)Super, Service
1
Marks physical disks as
allocatable for logical disks.
setpd
“showpd” (page 420)Any role in the system.Displays physical disks in the
system.
showpd
1
You need access to all domains in order to run this command.
Domain Management Commands
For Details SeeAuthorityDescriptionCommand
“changedomain” (page 56)Any role in the system.Changes the currentdomain
CLI environment parameter.
changedomain
“createdomain” (page 115)Super
1
Shows a list of domains on
the system.
createdomain
Any role granted the
domain_create right.
Disk Enclosure Management Commands 19