Command Reference Guide

setntp
DESCRIPTION
The setntp command sets the system Network Time Protocol (NTP) server. This command is
deprecated and will be removed in a subsequent release.
AUTHORITY
• Super, Service
• Any role granted the ntp_set right.
NOTE: You need access to all domains in order to run this command.
SYNTAX
setntp <server_IP_adress>|none
OPTIONS
None.
SPECIFIERS
<server_IP_address>
Specifies the IP address of the NTP server to which the HP 3PAR storage system synchronizes its
internal clocks.
none
Specifies that the HP 3PAR storage system should not synchronize its internal clocks with an external
NTP server. Instead, the system synchronizes its clocks internally.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example displays the setting of the system NTP server:
cli% setntp 192.168.1.1
NTP server successfully updated.
NOTES
None.
308 Set Commands