Command Reference Guide

setwsapi
DESCRIPTION
The setwsapi command sets properties of the Web Services API server, including options to
enable or disable the HTTP and HTTPS ports.
SYNTAX
setwsapi [options]
AUTHORITY
Super, Service
Any role granted the wsapi_set right
OPTIONS
-f
Forces the operation of the setwsapi command, bypassing the typical confirmation message.
At least one of the following options are required:
-http enable|disable
Enables or disables the HTTP port.
-https enable|disable
Enables or disables the HTTPS port.
SPECIFIERS
None.
EXAMPLES
To disable the HTTPS port:
cli% setwsapi -https disable
WARNING: The Web Services API server is active and will restart.
Are you sure you want to continue (y/n)? y
NOTES
Access to all domains is required to run this command.
You cannot disable both of the HTTP and HTTPS ports.
When the Web Services API server is active, a warning message showing the current status of the
Web Services API server is displayed and you will be prompted for confirmation before continuing.
The -f option forces the action without a warning message and prompt.
setwsapi 349