Command Reference Guide

shownet
DESCRIPTION
The shownet command displays the configuration and status of the administration network
interfaces, including the configured gateway and Network Time Protocol (NTP) server.
SYNTAX
shownet [option]
AUTHORITY
Any role in the system.
OPTION
–d
Displays detailed information.
SPECIFIERS
None.
RESTRICTIONS
None.
EXAMPLES
The following example displays the status of the system administration network interfaces:
cli% shownet -d
IP Address: 192.168.5.191 Netmask 255.255.252.0
Assigned to nodes: 01
Connected through node 0
Status: Active
Admin interface on node 0
MAC Address: 00:02:AC:43:00:34
RX Packets: 534389 TX Packets: 121669
RX Bytes: 67828134 TX Bytes: 60638375
RX Errors: 0 TX Errors: 0
RX Dropped: 0 TX Dropped: 0
RX FIFO Errors: 0 TX FIFO Errors: 0
RX Frame Errors: 0 TX Collisions: 0
RX Multicast: 0 TX Carrier Errors: 0
RX Compressed: 0 TX Compressed: 0
Remote copy interface in slot 1 on node 0
MAC Address: 00:04:23:C2:1B:72
RX Packets: 0 TX Packets: 0
RX Bytes: 0 TX Bytes: 0
RX Errors: 0 TX Errors: 0
RX Dropped: 0 TX Dropped: 0
RX FIFO Errors: 0 TX FIFO Errors: 0
RX Frame Errors: 0 TX Collisions: 0
RX Multicast: 0 TX Carrier Errors: 0
RX Compressed: 0 TX Compressed: 0
Remote copy interface in slot 1 on node 0
MAC Address: 00:04:23:C2:1B:73
RX Packets: 0 TX Packets: 0
shownet 407