Command Reference Guide

pd4 0x76 1 4 0 0 334 0
pd3 0x79 1 4 0 0 401 0
pd2 0x80 1 4 0 0 344 0
pd1 0x81 1 4 0 0 270 0
pd0 0x88 1 4 0 0 401 0
Port <0:0:1>
Loop <0:0:1> Time since last save: 0:00:28
ID ALPA LinkFail LossSync LossSig PrimSeq InvWord InvCRC
<0:0:1> 0xef 1 19 19 0 0 0
pd7 0x6d 1 5 0 0 465 0
pd6 0x72 1 5 0 0 890 0
pd5 0x73 1 4 0 0 969 0
pd4 0x76 1 5 0 0 761 0
pd3 0x79 1 4 0 0 815 0
pd2 0x80 1 4 0 0 925 0
pd1 0x81 1 7 0 0 3283 0
pd0 0x88 1 258 0 0 269 0
LESB compare completed
The following example displays the counters for port 1:0:2:
cli% showportlesb single 1:0:2
ID ALPA LinkFail LossSync LossSig PrimSeq InvWord InvCRC
cage1 0x1 3 4 0 0 755 0
pd12 0xef 1245 39201 0 0 156804 0
pd13 0xe8 1 1608 0 0 6432 0
pd14 0xe4 1 1586 0 0 6344 0
pd15 0xe2 1 1588 0 0 6352 0
pd16 0xe1 2 5088 0 0 20352 0
pd17 0xe0 1 1596 0 0 6384 0
pd18 0xdc 1 1595 0 0 6380 0
pd19 0xda 1 1596 0 0 6384 0
pd20 0xd9 2 5047 0 0 20188 0
pd21 0xd6 1 1604 0 0 6416 0
pd22 0xd5 1 1609 0 0 6436 0
pd23 0xd4 1 1616 0 0 6464 0
<1:0:2> 0xd3 0 1 1 0 0 0
cage0 0x18 1 165 0 0 26 0
pd8 0x67 2 865794 0 0 3463176 0
pd9 0x66 1 63932 0 0 255728 0
pd10 0x65 1 61572 0 0 246288 0
pd11 0x63 1 61525 0 0 246100 0
pd4 0x6c 2 67006 0 0 268024 0
pd5 0x6b 1 63474 0 0 253896 0
pd6 0x6a 1 63471 0 0 253884 0
pd7 0x69 1 63598 0 0 254392 0
pd0 0x72 2 65863 0 0 263452 0
pd1 0x71 1 64024 0 0 256096 0
pd2 0x6e 1 63942 0 0 255768 0
pd3 0x6d 1 63897 0 0 255588 0
The columns in the previous example are identified as follows:
• ID. The device ID.
• ALPA. Arbitrated Loop Physical Address.
• LinkFail. The Fibre Channel loop either has a loss of signal (electrical or optical) or a loss
of synchronization that is greater than the timeout period.
• LossSync. Fibre Channel data is not valid though there is a signal (electrical or optical).
456 Show Commands