Command Reference Guide

showsnmppw
DESCRIPTION
The showsnmppw command displays the SNMP community string passwords.
WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security
of the storage system.
SYNTAX
showsnmppw [options]
AUTHORITY
Any role in the system.
OPTIONS
–rw|–r|–w
Specifies that the read-write (–rw), read-only (–r), or write-only (–w) password is displayed. If not
specified, the read/write community string password is displayed.
SPECIFIERS
None.
RESTRICTIONS
None.
EXAMPLES
The following example displays all SNMP passwords:
cli% showsnmppw
[password]
EXIT STATUS
The following codes are returned indicating success or failure:
• 0 indicates that the command was successful.
• 1 indicates that the command failed.
NOTES
SNMP passwords are registered using the setsnmppw command. See “setsnmppw” (page 326)
for more information.
474 Show Commands