Command Reference Guide

option is also set to 1 if the CLI was started with the -listdom option or if the CLI was
started with the TPDLISTDOM environment variable.
• Type. Indicates the copy type of virtual volume and can be one of the following:
base. Base volume (not a copy).◦
◦ pcopy. Physical copy (full copy).
◦ vcopy. Snapshot copy (virtual copy).
◦ peer. Remote volume admit into the local HP 3PAR storage system.
• CopyOf. Displays the virtual volume from which the copy was made.
---. The virtual volume is a base volume.◦
◦ name. The name of the virtual volume from which a copy was made.
• BsID. If the virtual volume is a base volume or a physical copy, the base volume ID number
is the same as the ID number in the Id column. If the virtual volume is a virtual copy, the
column shows the base volume from which the copy was made.
• Rd. Indicates whether the virtual volume is read/write (RW) or read-only (RO).
• Detailed State. Indicates the current status of the virtual volume.
lds_not_started. LDs Not Started.◦
◦ needs_check. Needs to be checked for consistency.
◦ not_started. VV Not Started.
◦ needs_maint_check. A maintenance check is required.
◦ internal_consistency_error. An internal consistency error has been encountered.
◦ snapdata_invalid. Snapdata Invalid.
◦ preserved. One or more sets of an LD is unavailable due to missing chunklets and the
remaining VV data is preserved in a preserved data ld.
◦ stale. Parts of the VV contain old data because a copy-on-write operation failed.
◦ copy_failed. A promote or copy to this volume failed.
◦ degraded_avail. Degraded due to availability.
◦ degraded_perf . Degraded due to performance.
◦ promoting. Volume is currently the target of a promote.
◦ copy_target. Volume is currently the target of a physical copy.
◦ resync_target. Volume is currently the target of a resync copy.
◦ tuning. Volume is tuning.
◦ closing. Volume is closing.
◦ removing. Volume is removing.
◦ creating. Volume is creating.
showvv 511