Operating System Software Instruction Manual

33 Viewing the Cage Subsystems Tab
The Hardware Inventory Cage Subsystems tab provides information about system drive cage
components. The information is included on six additional tabs, which are discussed in the following
sections:
“Viewing the Cage Subsystems Drive Cages Tab” (page 480)
“Viewing the Cage Subsystems Interface Cards Tab” (page 481)
“Viewing the Cage Subsystems SFPs Tab” (page 482)
“Viewing the Cage Subsystems Magazines Tab” (page 482)
“Viewing the Cage Subsystems Physical Disks Tab” (page 483)
“Viewing the Cage Subsystems Power Supplies Tab” (page 484)
To access the Hardware Inventory Cage Subsystems tab:
1. Select Hardware Inventory in the Manager Pane.
2. In the Management Tree, select the Storage Systems node, or select a specific system node
(for example, s424).
3. In the Management Window, click the Cage Subsystems tab.
Viewing the Cage Subsystems Drive Cages Tab
The Cage Subsystems Drive Cages tab displays information about the system's drive cages.
To access the Cage Subsystems Drive Cages tab, select the Drive Cages tab after accessing the
Cage Subsystem tab.
The Cage Subsystems Drive Cages tab displays the following information:
DescriptionColumn
The system name.System*
The drive cage name.Name
The manufacturer of the drive cage.Manufacturer
The drive cage serial number.Serial Number*
The part number of the drive cage.Part Number*
The assembly's serial number.Assembly Serial Number
The assembly's part number.Assembly Part Number
The spare part number, if applicable.Spare Part Number*
The assembly revision, if applicable.Assembly Revision*
480 Viewing the Cage Subsystems Tab