Operating System Software User Manual

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 211
• 8 = AIX (legacy); NACA
• 9 = Egenera; SoftInq
• 10 = ONTAP (legacy); SoftInq
2. (Optional) In the Descriptors group box, enter the description information as desired
in the Location, IP Address, Operating System, Model, Contact, and Comments
fields.
3. Click Next, or click Finish to close the wizard and create the host with the information
entered.
Step 2. Fibre Channel
1. To assign available WWNs:
a. Select one or more WWNs from the Available WWNs list. This list displays WWNs
for all physically connected host paths not already assigned to hosts.
b. Click the left arrow to add the selected WWN(s) to the Assigned WWNs list.
2. To assign new WWNs, enter the WWN(s) for the host in the New WWN text box and
click Assign.
3. Click Next, or click Finish to close the wizard and create the host with the information
entered.
Step 3. iSCSI
1. In the iSCSI Host Paths group box:
a. Select one or more iSCSI names from the Available iSCSI Names list. This list
displays iSCSI names for all physically connected host paths not already assigned
to hosts.
b. Click the left arrow to add the selected iSCSI name(s) to the Assigned iSCSI
Names list.
c. To assign new iSCSI names, enter the iSCSI name(s) in the New iSCSI Name text
box and click Assign.
Note: Rules for the CHAP group box in the following step are as follows:
• When clicking the Initiator CHAP check box, CHAP Name is initialized
with the host name (default).
• The Target CHAP checKiBox is enabled when the Initiator CHAP check
box is selected.
• The CHAP Secret text box is required if a CHAP Name is entered.
• Target CHAP is optional.
• Target CHAP can only be populated if Initiator CHAP is populated.
2. In the CHAP group box:
a. Click the Initiator CHAP check box. The CHAP Name text box displays the host
name.
b. Enter a secret/password in the CHAP Secret text box.