Operating System Software User Manual

3PAR InForm Management Console 4.1.0 User’s Guide

358 320-200231 Rev A

Viewing Remote Copy Groups

A Remote Copy group is a group of virtual volumes on the same storage server that are

logically related, and on which Remote Copy operations are performed.

To view Remote Copy groups:

1. In the Manager Pane, click Remote Copy.

2. In the Management Tree, click Groups under the Remote Copy Configuration node

for the Remote Copy configuration you wish to view.

Information about Remote Copy groups appears on three panes in the Management

Window:

The left pane displays a graphical representation of the selected Remote Copy

configuration. The image includes the type of Remote Copy relationship (Remote Copy

over IP or Remote Copy over Fibre Channel) between the servers in the Remote Copy

configuration, the direction of replication (indicated with an arrow) between the servers,

the synchronization and Remote Copy status of the Remote Copy groups, and the number

of volumes being replicated. This image is updated for the Remote Copy group selected

from the upper right pane.

The upper right pane displays a table of the Remote Copy groups in the selected Remote

Copy configuration.

The lower right pane displays a table of the virtual volume(s) belonging to the selected

Remote Copy group from the upper right pane. The table can be filtered to display

information about virtual volume Pairs, the Source virtual volume, or the Backup virtual

volume.

Note: You can additionally view only synchronous Remote Copy groups or

asynchronous periodic Remote Copy groups by clicking either Synchronous

or Periodic, respectively, under the Groups node in the Management Tree.