Operating System Software User Manual

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 363
Configuring 1-to-1 Remote Copy
Note: 3PAR Remote Copy requires a 3PAR Remote Copy license. For
additional information about the license, see the 3PAR InForm OS Concepts
Guide.
A 1-to-1 Remote Copy relationship involves two InServ Storage Servers. Depending on how
the 1-to-1 Remote Copy relationship is configured, one server can serve as the primary
(source) server and the other the backup server (unidirectional), or both servers can serve
as both the primary and backup servers (bidirectional).
Note: In order to configure 1-to-1 Remote Copy, you must have two
available InServ Storage servers with configured Remote Copy ports.
To configure 1-to-1 Remote Copy:
1. In the Manager Pane, click Remote Copy.
2. In the Common Actions panel, click New Configuration.
The New Remote Copy Configuration wizard appears.
Step 1. Targets
1. Under Select a Topology, click 1-1.
2. Under Assign Systems, click a storage server graphic. In the menu that appears,
select a storage server to assign. Repeat for the other storage server graphic.
Note: Only available InServ Storage Servers, which satisfy requirements
appear. See the 3PAR Remote Copy User's Guide for additional information.
3. (Optional) Under Update System's Location, enter a location for each storage server,
e.g. Lab 1, New York.
4. (Optional) Under Name Targets, the Target Name fields are automatically populated
with the storage server names. You can enter an alternate name if you wish.
5. Click Next.