Operating System Software User Manual

3PAR InForm Management Console 4.1.0 User’s Guide
320-200231 Rev A 375
Note: When selecting volumes, you can filter the lists to include by clicking
the down arrow and selecting Virtual Volumes, Provisioning, and Virtual
Size. To clear the filter, click Clear.
5. Click Add.
6. (Optional) Repeat steps 1 through 5 to add additional virtual volumes to your Remote
Copy group(s).
7. Click Finish.
See also:
Manager Pane
Common Actions Panel
Viewing Configured Remote Copy Systems
Pinging RCIP Links
When creating Remote Copy over IP (RCIP) links, you are provided the opportunity to
configure
and ping the link ports to verify their validity and communication.
When pinging RCIP link ports:
You can click Details in the Port Configuration or Ping dialog boxes to show or hide
details about the configuration or ping operation, respectively.
If the MTU value of the ports is different, for example one value 1500 and the other value
9000, the lower packet size (1500) is used during the ping operation.
If both ports' MTU values are 9000, Jumbo Ping is displayed as the Ping group box title.
Configuring and Pinging the Remote Copy Links
Clicking Apply after entering or changing the requested link information during Remote
Copy link creation results in the entered configuration first being tested to check its validity,
and then proceeding with the ping operation to check communication between the link
ports. The ping is not executed if the configuration fails.