Operating System Software User Manual

3PAR InForm Management Console 4.1.0 User’s Guide
80 320-200231 Rev A
Managing Alerts
Once you have accessed and viewed the system alerts, either from the
Alert/Task/Connection Pane
or from the Alerts tab on the Systems screen, you can apply
the following actions to any selected alert.
Acknowledge the alert
Mark the alert as new
Mark the alert as fixed
Remove the alert
To apply an action to an alert:
If you accessed the alert from the Alert/Task/Connection Pane, right-click the alert and
click Acknowldege, Mark as Fixed, Remove, or Show Details.
If you accessed the alert from the Alerts tab on the Systems screen, right-click the alert
and click Acknowldege, Mark as Fixed, Mark as New, Remove, or Show Details.
See also:
Alert/Task/Connection Pane
Viewing System Alerts
Alert Severity Indicators
Locating a System
This operation helps locate an InServ Storage Server by oscillating the node status LEDs
amber and green on all nodes of the storage server. If desired, the LEDs in all connected
drive cages are also set amber or oscillate, depending on the drive cage type.
Note: This operation can only be performed by users with Super, Service,or
Edit privilege levels.
To locate an InServ Storage Server:
1. Click Systems in the Manager Pane.
2. From the Management Tree, right-click the InServ Storage Server you wish to locate
and then click Locate System.
3. Select a Duration for the LED(s) to oscillate (from 1 and 255 seconds).