Reference Guide

6.24
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
6.9.1 Connecting the Service Processor
The service processor uses customer-supplied connections, as outlined in Supported Network
Topologies on page 6.2. Table 6-8 provides general guidelines for completing these external
connections.
Table 6-8. Service Processor Connections
Connection type Configuration
Ethernet For service processor: connection from the RJ-45
connector in the eth 0 port at the rear of the service
processor to an Ethernet hub or switch (Figure 6-8).
Modem (optional) Connection from the line serial port at the rear of the
service processor to an RJ-11 modular telephone
outlet.