Reference Guide

vii
Table of Contents
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
5.3 Electrical Requirements and Limitations 5.7
5.3.1 Power and Heat Dissipation 5.7
5.3.2 Voltage Requirements 5.11
5.4 Power Quality 5.12
5.5 Voltage and Frequency Tolerance 5.13
5.6 Voltage Spikes 5.13
5.7 Electrostatic Discharge 5.13
5.8 Branch Circuits 5.14
5.9 Emergency Power Control 5.14
5.10 Redundant Power 5.14
6 Network, Cabling and Connectivity
6.1 Introduction 6.2
6.2 Planning Network Access 6.2
6.2.1 Supported Network Topologies 6.2
6.3 Adapter Connections for the E-Class/F-Class Controller Nodes 6.6
6.3.1 E-Class Controller Node 6.7
6.3.2 F-Class Controller Node 6.8
6.3.3 Controller Node Slot Loading Order 6.9
6.3.4 Drive Chassis Connections 6.11
6.3.5 Host Connections 6.11
6.4 TCP/IP Port Assignments 6.12
6.5 Required Cables 6.17
6.6 External Cable Connections 6.18
6.7 Internal Cable Connections 6.20
6.8 Cable Routing Options 6.21
6.9 Service Processor Connections 6.22
6.9.1 Connecting the Service Processor 6.24