Reference Guide

5.6
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
5.2.2 Power Cord Connections
3PAR InServ Storage Servers arrive with all internal power cords configured and connected.
The AC cords
connect two power supplies at the rear of the controller nodes and drive chassis
to the PDUs at the bottom of the cabinet. The length of the power cord is 10 feet. The power
cords can be routed through the lower access opening at the bottom of the cabinet or the
upper access opening at the top of the cabinet (Figure 5-4). The side panels are removable for
easier cabling access.
Figure 5-4. Power Cord Routing Options
0014_L_R3
Upper Access
Opening
Lower Access
Opening
(Front)
NOTE: When routing the power cords through the bottom of the 2 meter
cabinet, the cord extends 9.5 to 10 feet away from the cabinet. If routing the cord
from the top, approximately 4 feet of the cord is usable.