Reference Guide

6.9
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
6.3.3 Controller Node Slot Loading Order
Table 6-1 shows the controller slot loading order for the E-Class and F-Class controller nodes:
Table 6-1. Controller Node Slot Ordering
Usage Controller Slot Loading Order
E-Class Controller Node
Drive Chassis Connections 0, 1 or 3
Host Connections 3, 2 or 1
Remote Copy 2, 1
iSCSI Connections 2, 1
F-Class Controller Node
Drive Chassis Connections 2
*
, 0, 1
* Slot 2 can accommodate 4 drive connections or can be split to support both drive and host connections.
Host Connections 2
†
, 1, 0
† Slot 2 can be used for host connections where half of slot 2 (ports 1/2) are used for drives and the other
half (ports 3/4) are used for hosts.
Remote Copy (RCFC)
(RCIP uses the on-board GigE).
1, 0
iSCSI Connections 1, 0