Troubleshooting

queryConnectionParameters
The queryConnectionParameters command returns a list of parameters required to establish
connection with the array management system.
The following information is requested by SRM:
• Group of parameters required to establish a connection to the HP 3PAR Storage System
• Localized string representing title, address information, username, password, etc. to be
displayed to the user GUI
Troubleshooting checklist
Table 5 queryConnectionParameters Troubleshooting Checklist
Troubleshooting TipsExample of Key Log MessageProblem DescriptionProblem Area
This error means that the
input XML file does not
[2010-05-26 14:29:32.966
'TPDSrm.arrayMgm.AddGlobalWarning'
Missing log file path
information in the
input XML.
Check log file
path.
contain log file path and3PAR_2014 warning (id=1052)] Warning.
the logs generated with thisUnable to access the specified log folder. The
command will be saved to
the folder indicated.
log file will be available at the following
location: <C:\Program Files\VMware\VMware
vCenter Site Recovery
Manager\storage\sra\3PARInServ>.
This error means that the
default
[2010-05-26 18:00:07.531 'SetLogFolder'
3PAR_1001 info (id=6132)] Could not find any
Missing the resource
file.
Load default
resource dll.
TPDSrm.resources.dllresources appropriate for the specified culture
or the neutral culture. Make sure
file is missing from
"TPDSrm.MessageString.resources" was
installation. Reinstall the
package to repair the file.
correctly embedded or linked into assembly
"TPDSrm" at compile time, or that all the satellite
assemblies required are loadable and fully
signed.
queryConnectionParameters 15