Troubleshooting

Table 8 checkTestFailoverStart Troubleshooting Checklist (continued)
Troubleshooting TipsExample of Key Log MessageProblem DescriptionProblem Area
This error indicates that
the requested group for
[2010-05-27 16:33:37.734
'TPDSrm.checkTestFailoverStart.Run'
Invalid Remote Copy
group.
Check Remote
Copy group
status checking is not available3PAR_1022 error (id=1580)] Error. The
in the storage array.specified group <MmmtGroup1.r256> does
not exist in the storage array. Contact your storage
administrator and validate
the finding.
This error indicates that
the volumes participated
[2010-05-27 16:48:24.953
'TPDSrm.checkTestFailoverStart.Run'
Invalid volume state.
in the Remote Copy group3PAR_1021 error (id=860)] Error. The
secondary volumes are not in Synced state. are not in sync. If the
Remote Copy group is
started and the Remote
Copy link is healthy, SRA
requires all volumes to be
in synced state for test
failover operation.
checkTestFailoverStart 25