HP LaserJet Enterprise M406, M407 User Guide

3. Click the Paper/Quality tab, and locate the Print Quality area.
4. If the entire page is too dark, use these settings:
● Select the 600 dpi option, if available.
● Select the EconoMode check box to enable it.
If the entire page is too light, use these settings:
● Select the FastRes 1200 option, if available.
● Clear the EconoMode check box to disable it.
5. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to
print the job.
Adjust print density
Complete the following steps to adjust the print density.
1. From the Home screen on the printer control panel, select the Settings menu.
2. Open the following menus:
a. Copy/Print or Print
b. Print Quality
c. Toner Density
3. Move the slider toward either Less or More to the desired density setting.
Troubleshoot image defects
Review examples of image defects and steps to resolve these defects.
Table 6-3
Image defects table quick reference
Sample Description Possible solutions
Table 6-10 Light print on page 129 Table 6-8 Gray background or dark print on
page 128
Table 6-6 Blank page — No print on page
127
Table 6-5 Black page on page 126 Table 6-4 Banding defects on page 126 Table 6-12 Streak defects on page 130
124 Chapter 6 Solve problems