HP LaserJet Enterprise MFP M430, M431 User Guide

Table 7-2 Fax send settings (continued)
Menu item Description
errors in the transmission and a probable quality reduction in the image. Turning o
the setting might be useful when you are trying to send a fax overseas or receive one
from overseas, or if you are using a satellite telephone connection.
NOTE: Some VoIP providers might suggest turning o the Error Correction Mode
setting. However, this is not usually necessary.
Fax Header Use the Fax Header feature to control whether the header is appended to the top, and
content is shifted down, or if the header is overlaid on top of the previous header.
Fax receive settings
Use the following steps to change the fax receive settings.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select the
Settings icon.
2. Open the following menus:
a. Fax
b. Fax Receive Settings
c. Fax Receive Setup
3. Congure any of the following settings, and then select Done.
Table 7-3
Fax receive settings
Menu item Description
Receive Mode The Receive Mode setting determines how the fax accessory receives fax jobs. Select
one of the following options:
● Automatic
● TAM
● Fax/Tel
● Manual
Rings to Answer The Rings to Answer setting determines the number of times the phone rings before
the call is answered by the fax accessory.
NOTE: The default range for the available options for the Rings to Answer setting is
location-specic. The range of possible Rings to Answer options is limited by location.
If the fax accessory is not answering, and the Rings to Answer setting is 1, try
increasing it to 2.
Ring Volume The Ring Volume setting allows you to adjust the ringer volume.
Fax Receive Speed Touch the Fax Receive Speed drop-down menu and select one of the following options:
● Fast (v.34 – 33.6k)
●
Medium (v.17 – 14.4k)
● Slow (v.29 – 9.6k)
112 Chapter 7 Fax