HP LaserJet Enterprise MFP M430, M431 User Guide

Table Of Contents
f. Position the pickup roller with the pins in the provided slots on the holder, and then rotate the top of
the roller up and toward the printer.
Figure 9-15 Install the roller
g. Continue to rotate the top of the roller toward the printer (callout 1), until two tabs (callout 2) snap into
place.
Figure 9-16 Engage two tabs
h. Close the toner-cartridge door.
6. Perform a test page from tray 1 to see if issue is resolved.
7. If the error persists, contact your HP-authorized service or support provider, or contact customer support at
www.hp.com/go/contactHP.
154
Chapter 9 Solve problems